Uncategorized

Pros and Cons of Various Decking Materials

Whenever you are installing a deck for the first time or rebuilding an existing one, there are a lot of things to consider. The material you’re going to use is probably the most important aspect to think about. 

 

You’ve got two main categories of decking material. These are composites and wood. In terms of maintenance vs. upfront costs, both have pros and cons. If you’re planning on building a deck, gazebo, or pergolas, here are some decking materials to consider: 

Composites 

Made of recycled plastic and wood fibers. This is probably one of the best materials you can use.  

Pros 

  • It is defect free. To get rid of waste, you can utilize every inch of it.  
  • Almost every manufacturer also produces balusters, handrails, and other decorative features to complement the shades they offer. 
  • Manufacturers make a wide variety of stains because it is man-made. 
  • Since it is made from recycled plastic, it is resistant to decomposingrupturesfissures, stains, and weather compared to other materials. Because of this, the extra time and cost you will have to put in toward annual maintenance is almost nothing. 

Cons 

  • This material is greatly more expensive upfront. However, it is worth it if you factor in the cost, labor, and time of maintaining wooden decks over their lifespans on at least 20 years.  

Tropical Hardwoods 

GarapaCambaraTigerwoodMassaranduba, IPE, and Cumaru, are some tropical hardwoods utilized for pergolas. 

Pros 

  • Naturally, they are resistant to bugs and rot. They are also durable and hard. 
  • These tropical species offer rich color and unique options 

Cons 

  • Tropical Hardwoods don’t accept stains extremely well. Thus, you will have to use a stain that is oil-based penetrating. It will cause the color to fade to a silvery and soft gray if you do not stain the wood. You can also apply a UV-blocking and clear preservative every 4 years as a substitute for a stain. 
  • They are more expensive compared to PT wood. However, in a couple of parts of the country, they’re comparable to Cedar and Redwood. 
  • The wood’s density makes them hard and heavy. They are hard to drill and cut. It is almost impossible to drive a nail or screw into one of them. 

Cedar and Redwood 

Pros 

  • The oils and tannins in the wood offer a natural resistance to particular bugs or insects, decay, and rot. 
  • Redwood and cedar have rich color. Its beauty is also natural-looking. You cannot be find this on pressure-treated lumber. 

Cons 

  • They need yearly pressure washing. They also require a new finish coat every 4 years. These forms of wood will change color if you do not apply the stain. The truth is that Cedar has been known to turn gray within 10 years, even if you constantly stain it. 
  • The resistance of Cedar and Redwood to bugs and weather varies on the amount of sapwood vs. heartwood in the planks. 
  • Prone to splitting and cracks. 
  • In almost all areas of the country, these forms of wood cost a lot more expensive. Usually, they are cheaper in the western part of the country. 
Read More

Tips for Cleaning and Maintaining Your Spray Foam Gun

There are many old and trusted service companies when it comes to spray insulation just like the Richmond spray foam insulation. They are reliable, and have been in the industry for years and so their service is proven efficient by many customers.  

  

If you are still new to the industry, and still want to explore things about spray foam insulation, you need to know a lot of things and this does not exclude your gun’s regular maintenance and cleaning.  

 

It is very important to take good care of the tools you use at work, as they have the full potential to make or break a project. And of course, when it comes to spray foam, your number one equipment is your gun. Without it, there would be no project to do. In this article, we will provide some of the effective tips on how to clean and maintain your spray foam gun. 

 

1.Keep the maintenance on a regular basis 

Several years ago, the industry, as well as the customers heavily relied on specialized contractors and they had dominated the market for many years. However, things have changed and now, more and more rely on machines and equipment to do the tasks efficiently.  

 

Of course, it is good to assume that each product requires its own particular maintenance, but, generally, there exist some best practices of maintenance that all of these sprays and guns do share. One of which is regular rig maintenance, which, if left neglected, could lead to expensive repairs and inoperable equipment.  

 

2.Keep your rig clean and organized 

One of the best ways to survey and check your equipment is to out it properly and cleanly. When you just toss it away after work and the project, you will become passive on the possible issues it has, and this leads to further damage and costly repairs and replacements.  

 

3.Have a daily work log 

Keeping a work log every session is very important, although sometimes overlooked. While they can be sometimes forgotten, they become valuable when problems arise. They provide the necessary information that could trace what the problem is or trace the root cause of damage. It also gives you a piece of comprehensive information about your equipment and how they were used during the session, so when damages happen, you know where to get some valuable information.  

 

4.Be attentive on the O-Rings 

Your gun is a collection of different moving parts that need to be maintained regularly as when they collapse, this would mean no gun available for you. Unfortunately, the o-rings are generally prone to wear and tear so they can be easily damaged and result in the whole equipment’s failure – and this, my friend, means costly repairs.  

 

Final thoughts  

There are still many things to say but we prefer highlighting the four most important and essential tips on keeping your gun clean and maintenance and to avoid unnecessary problems and expenses. So, if you like to experience a better job performance, always check your equipment, as they are the very tool for your project’s success. 

Read More

Recent Comments